The Smok OSUB 80W Baby Kit is another quality kit in the OSUB series. While it is somewhat similar to the Smok OSUB Plus 80W, the OSU 80W Baby Kit is smaller and more stylish. It can be carried about conveniently.

Another difference between the OSUB Plus 80W Kit and the OSUB 80W Baby Kit is that while the former runs on a non-removable 3300mAh battery, the latter needs a single rechargeable 18650 cell battery to function.

The Smok OSUB 80W Baby Kit basically consists of the popular TFV8 Baby Beast Tank and the OSUB 80W Baby Mod. It comes in several attractive colors including black/stainless steel, purple/black, gold, and multi-color. The multi-color version is really eye-grabbing. You can get the Smok OSUB 80W Baby Kit at any top vape store for $49.99.

The Smok OSUB  80W Baby Mod is made of zinc alloy like other Smok products. It has a dimension of 83mm by 37mm by 22mm and a weight of 130g. The mod can produce between 1W to 80W and has a temperature range of 100 degrees Celsius to 315 degrees Celsius. The battery compartment is located at the base of the mod.

You can use the Smok OSUB 80W Baby Kit in either temperature control or wattage mode. In the temperature control mode, it has a resistance of 0.3ohm to 1ohm. In the wattage mode, it has a resistance of 0.06ohm to 3ohm.

Like other OSUB mods, the OSUB 80W Baby Mod has a large firing bar on its side. Unlike its predecessors, the bar is quite solid and does not rattle when you touch it. On the front of the mod is a small OLED screen. The interface of this screen is the same as that of the OSUB 40W Mod. You have to click it five times to turn on the mod and lock the device. If you click it three times, you will be directed to the menu.

Like other vaping devices, the screen shows the temperature, resistance, wattage, and other settings. Below the screen are two adjacent up and down buttons that can be used to navigate the menu and make your desired setting. There is a USB port under these buttons. A micro USB cable is included in the package which can be used to charge the device and also to upgrade the firmware.

The Smok OSUB 80W Baby Mod comes with the TFV8 Baby Beast Tank that is preinstalled with V8 Baby Q2 Dual Coil. This is one of the best coils ever produced by Smok. The 0.4ohm coil can support a wattage range of 40W to 80W. However, it is best to use it between 55W to 65W. The OSUB 80W Baby Kit works with both nickel, titanium, and stainless steel coils.

The TFV8 Baby Beast Tank has a capacity of 3ml, and has a simple top refilling system. To access the tank, all you have to do is slide the top cap counter-clockwise. When you push it back in place, it makes a click sound to make you know that it is locked. The tank features two adjustable airflow ports.

The Smok OSUB 80W Baby Kit has many safety features including overheating and short circuit protection. It also has low battery warning and a 12-second cut-off.

Overall, the Smok OSUB 80W Baby Kit is a top shelf vaping device. It has a really beautiful design with rounded edges that makes it fit in hand without any issues.

This is a vape kit to get if you want to fill your room with clouds. It is perfect for sub ohm vaping. The short distance it takes for the vapor to travel from the coil to your mouth means that it comes out warm and flavorful. Have I already mentioned that the OSUB 80W Baby Kit has a removable drip tip?

LEAVE A REPLY

Please enter your comment!
Please enter your name here